Gravel Cost Per Ton Calculator
Estimate the total cost of a gravel project from the price per ton, including tonnage, delivery loads, and cost breakdown.
Quick Answer
To estimate gravel cost, multiply the tons you need by the price per ton, then add delivery. Gravel runs about $20–$55 per ton before delivery, and a full 20–25 ton dump-truck load is roughly $600–$3,750 delivered.
Gravel Cost Per Ton Calculator Guide
The gravel cost per ton calculator turns a supplier's price per ton into a real project budget. Enter your project size and the price you were quoted, and it works out the tonnage you need and the total cost, plus how many truck loads that represents. Because gravel is sold by weight but measured on the ground by area and depth, this bridges the gap between the two.
Gravel prices vary a lot by type and region. The table below shows typical 2026 U.S. per-ton ranges before delivery, so you can sanity-check a quote or plan a budget before you call around.
Gravel price per ton by type (2026 U.S. averages, before delivery):
| Gravel type | Price per ton | Common use |
|---|---|---|
| Bank-run / pit gravel | $20–$35 | Fill and rough sub-base |
| Crusher run / DGA | $22–$38 | Driveway and road base |
| Crushed stone (#57, #67) | $25–$55 | Drainage, concrete, driveways |
| Pea gravel | $30–$55 | Patios, paths, play areas |
| River rock | $40–$75 | Decorative landscaping |
What Affects the Price of Gravel?
Delivery is usually the biggest add-on: expect $10–$25 per ton, though many yards deliver free within a few miles once you hit a 5-ton minimum. Haul distance drives that number — gravel from a quarry within 20 miles typically costs $10–$20 less per ton than material trucked from far away. Bulk discounts often kick in around 10 tons, and buying in the off-season can shave 20–25% off during low demand.
Typical delivered gravel costs (2026):
| Order | Typical tonnage | Delivered cost |
|---|---|---|
| Small load (pickup) | 1–3 tons | $60–$250 + fees |
| Local delivery add-on | per ton | +$10–$25 / ton |
| Full dump-truck load | 20–25 tons | $600–$3,750 |
Estimating Your Total Cost
The formula is simple: tons needed × price per ton, plus delivery. To find the tons, convert your area and depth to cubic yards and multiply by the material density — or let the cubic yards to tons calculator do it. For driveways priced by volume instead, the gravel driveway cost per yard calculator and our guide on ordering gravel without overage help you avoid paying for material you will not use.
Frequently Asked Questions
How much does a ton of gravel cost in 2026?
Most gravel costs $20–$55 per ton before delivery, depending on type. Bank-run and crusher run are cheapest ($20–$38), crushed stone and pea gravel sit in the middle ($25–$55), and decorative river rock is highest ($40–$75).
How much area does a ton of gravel cover?
At 2 inches deep, a ton of gravel covers roughly 100 square feet; at 3 inches, about 80 square feet. Coverage varies with stone size and density, so use the gravel coverage calculator for your exact depth.
How much is a truckload of gravel?
A full dump-truck load of 20–25 tons typically costs $600–$3,750 delivered within about 50 miles, depending on the gravel type and haul distance. Most homeowners pay $1,200–$2,400 for a full load.
Is it cheaper to buy gravel by the ton or by the yard?
It depends on how the yard prices it, but the two are easy to compare once you convert. One cubic yard of gravel weighs about 1.4 tons, so a $40/yd price is roughly $29/ton. Convert your quote with the cubic yards to tons calculator before deciding.
How can I save money on gravel delivery?
Buy from the closest quarry, order at least the free-delivery minimum (often 5 tons), combine loads to earn bulk discounts around 10 tons, and schedule in the off-season when demand — and price — drops.