Stone Veneer Calculator
Calculate the square footage of stone veneer for wall facings.
Stone Veneer Calculator
1. Wall Dimensions
2. Openings (Windows, Doors)
3. Corners & Waste
Total height of all corners
4. Cost Estimation (Optional)
Your Veneer Estimate
Enter your wall's details to generate a material shopping list.
How to Use the Stone Veneer Calculator
The stone veneer calculator is an essential planning tool for any facade, accent wall, or fireplace surround project. Unlike calculators that measure volume, this tool focuses on square footage—the key metric for any wall covering. It allows you to calculate the total surface area of your wall and, crucially, subtract the area of windows, doors, and other openings.
Properly estimating for stone veneer requires accounting for waste. A waste factor of 10-15% is industry standard. This extra material is vital to cover cutting mistakes, breakage, and the intricate cuts needed to fit around corners and edges. Our tool makes it easy to add this buffer, ensuring you order the right amount of both 'flats' (for the main wall) and 'corners' for a professional finish.
Frequently Asked Questions
How do you calculate stone veneer for a wall with windows?
First, calculate the total square footage of the wall (width x height). Then, calculate the square footage of each window and door. Our calculator allows you to subtract these opening areas to find the net square footage you need to cover.
Why do I need a 10% waste factor for stone veneer?
A waste factor is critical to account for the material lost during cutting and fitting, especially around corners, outlets, and windows. Without it, you will almost certainly run out of stone before the job is finished.
What is the difference between "flats" and "corners" in stone veneer?
Flats are the pieces used to cover the main surface of a wall and are sold by the square foot. Corners are L-shaped pieces used to wrap around outside corners for a seamless look and are sold by the linear foot.
How much does stone veneer weigh?
Modern manufactured stone veneer is lightweight, typically under 15 lbs per square foot, so it doesn't require a structural footing like full-thickness stone. Natural thin stone veneer is heavier, around 15-25 lbs per square foot.
Can I install stone veneer myself?
Yes, stone veneer installation is a popular DIY project. It involves applying a scratch coat of mortar, setting the stones with another layer of mortar, and then filling the joints (grouting) after the stones have set.
How do you calculate linear feet for corner pieces?
Simply measure the height of all the outside corners you need to cover. For example, a single 8-foot tall corner requires 8 linear feet of corner pieces.